Zhejiang RONGPENG Air Tools Co., Ltd.318057About UsSHUIQUETOU VILLAGE,PENGJIE TOWN,LUQIAO,TAIZHOU,ZHEJIANG,CHINARONGPENG was founded in 1990,was originally a manufacturer of air spray guns as its main product.
In 1994, ROGNPENG expanded our manufacturing to include Air Nailing and Stapling tools.
In 2003, RONGPENG added production of Air Tools and in 2008 included Airless Paint Sprayers as well as launched our successful brands SJX, BSW & BK lines of air tools into the domestic market.
As growth of our company continued, January 2009 RONGPENG moved into its newly completed 100,000 square meter factory. With our 1600 dedicated employees and a monthly capacity of 500,000 Air Spray Guns, 300,000 Nailing and Stapling tools, 400,000 Air Tool
Air tools runs at normal speed, but loses under load
Motor parts worn
Cam cluth worn or sticking due to lack oflubricant
Lubricating clutch housing.
Check for excess clutch oil.
Clutch cases need only be half full Overfilling Can cause drag on high speed clutch parts,is a typical oiled/lubricated wrench requires 1/2 ounce of oil
Air tools runs slowly, Air flows slightly from exhaust
Air tools's motor parts jammed with dirt particles
Power regulator in closed position
Air flow blocked by birt
Check air inlet filter for blockage.
Pour air tools lubricating oil into air inlet as per instructions.
Operate tool in short bursts quickly reversing rotation back and forth where applicable.Repeat above as needed.Air
Air tools will not run, Air flows freely from exhaust
One or more air tools's motor vance stuck due to material build up
Pour air tools lubricating tool into air inlet
Operate tool in short bursts of forward and/or reverse rotation where applicable
Tap motor housing gently with plastic mallet
Disconnect supply. Free motor by rotating drive shank manually where applicable
Air tools will not shut off
Air tools's"O"rings throttle valve dislodged from seat inlet valve
